Détails de la société

  • Changzhou Ruide Drying Engineering Technology Co., Ltd

  •  [Jiangsu,China]
  • Type d'Affaires:Fabricant
  • Main Mark: Amériques , Asie , L'Europe  , Europe du Nord , Autres marchés , Europe occidentale
  • Exportateur:71% - 80%
  • certs:ISO9001
  • La description:Les fabricants de système de transport pneumatique de phase de Dilute ont fait sur commande,Systèmes de transport pneumatique à phase diluée,Système de transport pneumatique de phase diluée par coutume de fabricants
Panier (0)

Changzhou Ruide Drying Engineering Technology Co., Ltd

Les fabricants de système de transport pneumatique de phase de Dilute ont fait sur commande

,Systèmes de transport pneumatique à phase diluée,Système de transport pneumatique de phase diluée par coutume de fabricants

Accueil > Liste de Produits > Système de transport pneumatique > Système de transport pneumatique à phase diluée > Diluer la phase pneumatique transportant les fabricants de système personnalisé
Groupes de Produits
service en ligne

Diluer la phase pneumatique transportant les fabricants de système personnalisé

Partager sur:  
    Prix ​​unitaire: USD 26500 - 7500 / Set/Sets
    Incoterm: FOB
    Quantité de commande minimum: 1 Set/Sets
    Délai de livraison: 30 jours

Informations de base

Modèle: Dilute phase pneumatic conveying system

Additional Info

Détails d'emballage: Caisse en bois

productivité: 15sets

marque: Ruide

transport: Ocean

Lieu d'origine: Chine

Capacité d'approvisionnement: 2Sets/Month

Certificats : ISO9001

Description du produit

Product range: Dense Phase Systems

Product category: Pneumatic Conveying Series

Product introduction:

It can be with two ways: tank transmission and rotary valve transmission. The former is through compressing the tank to a stated pressure,switching the discharging valve and air knife to distribute materials( they are in the state of a plunger to realize the whole process of transmission. Speed of airflow transmission is much lower, yet fixing this kind of airflow is much higher. Besides, transmitting barometric pressure is also higher. Air or nitrogen is usually used for transmitting with compressor providing power. Its main characteristics are low transmission speed and little influence against quality of material. Rotary valve pneumatic hyperflow is in the way of Dilute Phase positive pressure to transmitting with compressor providing power. This system has much higher pressure, much lower speed of flow, but much heavier transmitting capacity with little influence again materials.

 conveying system

Pneumatic Hyperflow system usually has the following combination:

 

1. Solid-state Dense Phase

It is usually used for single-point feeding materials, long-distance transmission with the materials being fragile and abrasive. It is almost full of materials in type of plunger flow moving forward in the tubing, which is in a low speed and high density way to transmitting materials in the tubing.

 

2. Discontinuous Dense Phase

It is usually used for single-point feeding materials and much longer-distance transmission. It is almost full of materials in type of plunger flow moving forward in the tubing. Those materials have little abrasiveness to the tubing and are invulnerable to breakage. And they are usually transmitted by positive pressure.

 

Positive transmitting system is an energy-saving with high efficiency transmitting way to transmit materials to a long distance by compressed air.

 

Its air supply is compressor air motor.

 conveying system

According to different transmitting materials and layout forms, it is necessary to calculate pneumatic transmission seriously and rigidly.

 

There are several different transmission ways for positive pressure system as follows:

 

1). In the way of Feeding through Star-rotary valve, transmit materials in the tubing into store holder

2) In the way of Feeding through rotary valve, transmit materials in the tubing into store holder.

 

3). combined negative pressure/ positive pressure transmitting system is through negative pressure driving the near multipoint materials into the aggregate bin, and the bin pump set below the aggregate bin transmitting materials into store holder or other receiving points.

 

3. Continuous dense phase

It is the way of Multipoint feeding and single-point discharging. Materials Transmission speed in the tubing is lower than that of suspended state which is suitable for transmitting powder and little granule.




Groupes de Produits : Système de transport pneumatique > Système de transport pneumatique à phase diluée

image de Produit
  • Diluer la phase pneumatique transportant les fabricants de système personnalisé
  • Diluer la phase pneumatique transportant les fabricants de système personnalisé
  • Diluer la phase pneumatique transportant les fabricants de système personnalisé
Envoyer à ce fournisseur
  • *Sujet:
  • *Messages:
    Votre message doit comporter de 20 à 8000 caractères
Contacter le Fournisseur?fournisseur
Denis Mr. Denis
Que puis-je faire pour vous?
T'Chat contacter le fournisseur